Embedded Files
Equipment Available for Check-Out
Equipment Available for Check-Out
Calipers
Micrometers
Soldering Irons
Calibrated Weights
Digital Scale
MyDAQ & Breadboard
Thermocouple (Type K & J)
Thermocouple Reader
Load Cell
Strain Guage
Please ask a Student Lab Tutor if you would like to check out any equipment!
Equipment Available to use in-lab
Equipment Available to use in-lab
ENGR 108
Materials Science/Instrumentation
ENGR 110
Thermofluids
Tinius Olsen Tensile Tester (H50KS Model)
Tinius Olsen Tensile Tester (H50KS Model)
Capable of tensile and compression testing
50kN load capacity
Programmable testing procedures
Can export test data to .csv file
Grip dimensions 1" x .45" x 2"
Tensile Tester Safety:
Wear Safety glasses and cut resistant gloves
Wear clothes-toed shoes, and avoid loose clothing
Do not wear headphones and keep hair tied back
Only place approved items in the tensile tester
Ask the Student Lab Tutors (SLTs) for help with the software and to verify safety measures
Tinius Olsen Impact Tester
Tinius Olsen Impact Tester
IT Series
Adjustable weights up to 1556g
Maximum sample size .5" x 1" x 4"
Impact Tester Safety:
Wear Safety glasses and cut resistant gloves
Wear clothes-toed shoes, and avoid loose clothing
Do not wear headphones and keep hair tied back
Only one person is permitted in the working radius (5ft within the Impact Tester) during testing.
Wilson 504R Hardness Tester
Wilson 504R Hardness Tester
60kN, 100kN, and 150kN major loads
Rockwell (HRC) and Brinell (BHN) hardness capabilities
Vertical Capacity: 12"
Electric Furnace
Electric Furnace
Max temperature of 2250 F (1232.2 C)
240 V (AC usage), 39 Amps
16" x 20" x 12" chamber
Electric Furnace Safety:
Wear the proper heat insulated gloves, helmet, and jacket (provided)
Wear clothes-toed shoes, and long pants
Do not wear headphones and keep hair tied back
Only place approved items in the furnace
Wind Tunnel
Wind Tunnel
7' x 2' x 2' testing space
Infinitely adjustable wind speed between 2.29 m/s and 68.6 m/s
Strain gages to measure lift and drag forces
Air Conditioning Lab Unit A660
Air Conditioning Lab Unit A660
Airflow is adjustable to at least 0.14 m^3/s
Switchable heating up to 4kW
Bulb sensors with 0 to 100% RH measurement capability
Heat Engine Circulating Water Baths
Heat Engine Circulating Water Baths
7 Liter Capacity
-20 to 200 C or -4 -to 392 F Range
Model (AD07R-20-A11B)
NI myDAQ & MyProto board
NI myDAQ & MyProto board
15, -15, 5, Ext V power supply
Measures up to +-10 V signals
Digital Multimeter
Adiabatic Calorimeter
Adiabatic Calorimeter
Schedule two weeks in advance
8,000 Calorie limit
30 atm max pressure
1.5 gram cap limit on sample material
Centrifugal Pump
Centrifugal Pump
Adjustable Vanes, forward, backward, and straight
Flowmeter, Pressure Inlet and Outlet, Temperature, and Torque measurements
Instruction Manual
Page updated
Google Sites
Report abuse